bb1110tb, BB1110B, bb1110i and bb2110di ddr sdram terminator networks bb 1110 / 2110 series this bb family of networks is for terminatng sstl_2 class i and class ii systems, such as ddr sdram. these specialty networks employ solder balls for surface mount fip chip atachment. their unique constructon yields extremely low capacitance and inductance parasitcs making them ideal for high-speed bus applicatons. 18 bit sstl_2 terminaton sets. compliant to jedec std. 8-9b. superior high frequency performance. minimal stray capacitance and inductance are achieved by placing resistors and bga terminaton on the same side of ceramic substrate. the device can be easily surface mounted using automatc pick and place equipment parameter (maximum) limit units resistance, nominal various absolute tolerance 1 % temperature coefcient of resistance 200 ppm/c interlead capacitance, maximum 0.1 pf operaton temperature -55 to 125 c power ratng (per package) 1 wat descripton electrical schematc xx denotes part number optons. see ordering informaton for details. resistors ma ke p ossibl e 07.14 general note tt electronics reserves the right to make changes in product specifcation without notice or liability. all information is subject to tt electronics own data and is considered accurate at time of going to print. ? tt electronics plc www.ttelectronicsresistors.com all pb-free parts comply with eu directve 2011/65/eu (rohs2)
bb1110tb, BB1110B, bb1110i and bb2110di ddr sdram terminator networks bb 1110 / 2110 series dimensions (mm) 07.14 general note tt electronics reserves the right to make changes in product specifcation without notice or liability. all information is subject to tt electronics own data and is considered accurate at time of going to print. ? tt electronics plc www.ttelectronicsresistors.com ma ke p ossibl e
part number resistor number resistor value (?) array pitch (mm) tape/reel capacity 7 tape/reel capacity 13 bb1110tb r1/r2 50/25 3x9 1.0 1000 4000 bb1111tb r1/r2 25/22 3x9 1.0 1000 4000 bb1112tb r1/r2 60/25 3x9 1.0 1000 4000 bb1113tb r1/r2 60/60 3x9 1.0 1000 4000 BB1110B r1 50 3x9 1.0 1000 4000 bb1111b r1 100 3x9 1.0 1000 4000 bb1112b r1 25 3x9 1.0 1000 4000 bb1110di r1 25 4x9 1.0 1000 4000 bb1111di r1 22 4x9 1.0 1000 4000 bb11112di r1 33 4x9 1.0 1000 4000 bb11113di r1 47 4x9 1.0 1000 4000 bb1110i r1 25 3x9 1.0 1000 4000 ordering informaton applicaton notes add 7 for 7-inch reel or 13 for 13-inch reel to part number. example: BB1110B7 (1000 parts packaged in 7 inch reel) BB1110B13 (4000 parts packaged in 13 inch reel) schematcs per jedec standard no. 8-9b. sstl_2, class i, symmetrically single parallel terminated output load, and series resistor bb2110di BB1110B 07.14 general note tt electronics reserves the right to make changes in product specifcation without notice or liability. all information is subject to tt electronics own data and is considered accurate at time of going to print. ? tt electronics plc www.ttelectronicsresistors.com ma ke p ossibl e
sstl_2, class i, bufer with symmetrically double parallel terminated output load sstl_2, class ii, symmetrically double parallel terminated output load with series resistor BB1110B BB1110B bb1110tb BB1110B 07.14 general note tt electronics reserves the right to make changes in product specifcation without notice or liability. all information is subject to tt electronics own data and is considered accurate at time of going to print. ? tt electronics plc www.ttelectronicsresistors.com bb1110tb, BB1110B, bb1110i and bb2110di ddr sdram terminator networks bb 1110 / 2110 series ma ke p ossibl e
|
